Wash the surface with plenty of water so all loose particles is removed. The surface has to be dry before you give it the nano technological treatment. If the surface is badly damaged we recommend you to use a cleaning material for Gelcoat and wash with plenty of water.

Nano treatment:

Shake the bottle well before use. Polish the undiluted product evenly with circular movements on the surface, use a soft sponge or cloth. Plain dirt dissolves very easily. After a response time of 5 minutes or when the surface seems dry, polished again with a dry cloth. Polish equipment can also be used. If the surface is worn to the weather, and dirt stuck in the cracks and crevices, repeat the treatment.
At 15 degrees Celsius, the surface is ready for use after 1 hour

Consumption:
250 ml. - Equivalent to the consumption of freeboard on a 30-foot yacht.

Effect:
The surface will be much easier to clean. Dirt and marks after the fenders on the freeboard are removed by the use of water and possibly a soft brush. If necessary, mild cleaning material and / or high pressure cleaner can be used.
Repeated treatments prolong the effect.

Note!
Can usefully be used on aluminium and stainless steel!

Working temperature: 5 – 30 degrees C,

It is not recommended to work with the product in direct sunlight.